PRODUCTS

(RSIC-1™)
Low Profile Wall Systems

The RSIC™ Low Profile Wall System

The RSIC-DC04™ low profile wall system has been developed to provide a low profile, high performance, noise control system. The RSIC-DC04™ or the RSIC-DC04X2™ are used to support the studs in a wall or joists in a ceiling system.

These systems are adjustable to allow for a low profile (1/2” to 2”) separation. The RSIC-DC04™ and RSIC-DC04X2™ clips are designed to support additional studs (in walls), or joists (in ceilings) separate from the structural framing members.

Note: The RSIC-DC04™ and RSIC-DC04X2™ are not designed to carry structural loads. The RSIC-DC04™ and RSICDC04x2 are intended to support the loads of gypsum board and uniform loads only. Focused loads and point loads must be engineered by a licensed professional.

RSIC-DC04™ Low Profile Wall System (Standard Duty)

The RSIC-DC04™ Low Profile Wall System Standard Duty consists of two RSIC-1 DC04 clips supporting the bottom of each Stud, and one RSIC-DC04™ supporting the top of each stud.

RSIC-DC04™ Low Profile Wall System (Heavy Duty)

The RSIC-DC04™ Low Profile Wall System Heavy Duty consists of two RSIC-DC04™ clips supporting the bottom of each Stud, and two RSIC-DC04™ supporting the top of each stud.

RSIC-DC04™ Low Profile Wall System (Standard Duty)
RSIC-DC04X2™ Design

The RSIC-DC04X2™ Low Profile Wall System Standard Duty consists of one RSIC-DC04X2™ clips supporting the bottom of each Stud, and one RSIC-DC04™ supporting the top of each stud.

RSIC-DC04™ Low Profile Wall System(Heavy Duty)
RSICDC04x2 Design

The RSIC-DC04X2™ Low Profile Wall System Heavy Duty consists of one RSIC-DC04X2™ clips supporting the bottom of each Stud, and one RSIC-DC04X2™ supporting the top of each stud.

Verify product application before adding to UL Fire Rated Assemblies