Soundproofing and Sound Isolation Products
Print this page

PRODUCTS

RSIC Perimeter Tape

RSIC Wall and Ceiling Perimeter Tape

Material Type: Polyethylene Foam with Adhesive Backing
Thickness: 1/4"
Length: 50'
Width: 1"
Cut With: Scissors, Knife, or Saw
Tensile Strength: 39 psi
Density: 2 lbs./cu. ft.
Ideal temperature Range: 0 to +140 F
Working Temperature Range: -20 to +160 F
Foam Structure: Closed Cell
Firmness, psi: 5 (25% Deflection)
Color: White
Properties: Oil Resistant, Abrasion Resistant, Tear Resistant, Impact Resistant, Weather Resistant, Chemical Resistant

GENERAL INFORMATION closed cell polyethylene foam tape with single side rubber based adhesive. Available in rolls 1/4 inch thick x 1 inch wide x 50 foot long. RSIC Perimeter tape is flexible to conform to most surfaces, smooth or irregular. Use at perimeter of ceilings, and walls to isolate and dampen edge of sheet materials.

APPLICATION Clean surface thoroughly before use. Test product for system compatibility, job site conditions and materials may impact results. Position tape to within 1/8 inch of the gypsum boards final position. The tape should be in full contact with the perimeter of the sheet good (gypsum board, or wood paneling). If the tape is misaligned , remove discard, and re-apply. RSIC Perimeter Tape is a one time use material, and can not be removed and re-applied.



Verify product application before adding to UL Fire Rated Assemblies


RSIC REVOLUTION